AS 4687.2:2022 — Drop a pin → site wind speed → certified configuration · Powered by 1300TempFence
ENGINEER-VERIFIED CONFIGS
1Drop a pin on the site
Search the address or click the exact fence/hoarding location. The tool reads the surrounding terrain and topography automatically.
Drop a pin to begin.
2Site parameters ● auto-detected
Derived from the pin per AS 4687.1. Adjust any value if you have better local knowledge — the engineer's judgement always overrides.
CheckWind: not connected
Design Wind Speed (Vdes)
— m/s
Drop a pin to calculate.
3Fence
Standard temp fence: 2.1 m overall, 1.8 m mesh infill (the loading surface). Cover drives the wind load — bare weldmesh is mostly open; shade cloth / banner mesh catches far more wind and needs bracing, stays & counterweights.
Required configuration
Drop a pin and select a cover % to match a configuration.
Wind action & calculation breakdown
Pressure q
— Pa
Force / metre
— N/m
O'turning / bay
— N·m
Stability basis (BE Consulting Engineers): overturning only (sliding not governing for temp fence). OTM = Wu × effective height, resisted by Σ(component weight × moment arm): fence-footing counterweights (≈0.285 m), hook-bar assembly (≈0.23 m), back-stay counterweights (≈0.99 m), open-V-brace counterweights (≈3.0 m), plus panel/stay self-weight. CW block ≈31.6 kg. Bare-weldmesh solidity 0.16. The certified drawing encodes the exact counterweight/stay/hook layout.
Status: Vdes and wind action computed per AS 4687.1:2022 (engine validated vs Standard Table 4). Site parameters are auto-estimated from mapping/elevation data and must be confirmed by the responsible person. Configuration is selected from Ready Industries' stamped, engineer-certified designs — build to the named drawing. Where Vdes exceeds the certified range, or in cyclonic Regions C/D, a project-specific design is required.
Ready Industries Pty Ltd · AS 4687.2:2022 · 44 certified configs · Vdes validated vs Standard Table 4 · v3.0